DELTA Series:
The metal still case is attractively finished in a durable powder coating. The DELTA may be wall, shelf or bench mounted. The still monitors the water level in any reservoir to which you connect it, and controls the operation of the still, turning it on and off as the water level changes in the reservoir.
Together with over-temperature and feed water supply failure protection, this allows 24-hour unattended operation. The configuration of the DELTA Still can be changed in minutes, to produce 3 or 6 litres per hour single distilled water, or 3 litres per hour double distilled water.
A version of the DELTA can also be supplied as a DELTA DUAL FEED Still for use with regulated pre-treated or low pressure water sources or storage tanks. It uses two water supplies, mains pressure water for cooling in the condenser, while the low pressure water to be distilled is trickle fed into the boiler.
DISTILLATE QUALITY may vary depending on the quality of the water source. The pH and conductivity of Distilled Water changes when exposed to the atmosphere. This is a result of Carbon Dioxide absorption that is temperature dependent, and is not an indication of a change in overall purity.
PH........... 5 to 6.5 approx. Conductivity μS/cm, Double Distilled............ 1.5 approx. Pyrogen free
Why you should choose a DELTA Water Still:
DELTA Stills provide the cheapest source of high purity water for all applications, have no expensive consumables to replace on a regular basis, handle poor water supply quality when other systems would clog, remove bacterial contamination, and spare parts are permanently available.
When ordering a still, you must advise if the still is required to be configured as DUAL FEED for distilling water from another purification system or low pressure water supply.
DELTA 240V 50/60Hz 20 amp AC 4300W
STILL CASE DIMENSIONS W x D x H
DELTA 61cm x 33cm x 37cm
DUAL FEED Model 64cm x 33cm x 37cm
Carton Size 75cm x 45cm x 53cm
Packed weight: DELTA 19kg DELTA DUAL FEED 20kg
CASCADE SERIES
The metal still cases are attractively finished in a durable powder coating. Each Still may be wall, shelf or bench mounted. The still monitors the water level in any reservoir to which you connect it, and controls the operation of the still, turning it on and off as the water level changes in the reservoir. Together with over-temperature and feed water supply failure protection, this allows 24-hour unattended operation of all stills.
The CASCADE Still produces 3 litres per hour single distilled water.
A version of the CASCADE can also be supplied as a CASCADE DUAL FEED Still for use with regulated pre-treated or low pressure water sources or storage tanks. It uses two water supplies, mains pressure water for cooling in the condenser, while the low pressure water to be distilled is trickle fed into the boiler.
DISTILLATE QUALITY may vary depending on the quality of the water source. The pH and conductivity of Distilled Water changes when exposed to the atmosphere. This is a result of Carbon Dioxide absorption that is temperature dependent, and is not an indication of a change in overall purity.
PH......... 5 to 6.5 approx. Conductivity μS/cm, Single Distilled.......... 2.0 approx. Pyrogen free.
DUAL FEED Conductivity μS/cm, from Single Distilled Pre-treated feed water.........1.5 approx.
CASCADE 240V 50/60Hz 10 amp AC 2000W
STILL CASE DIMENSIONS W x D x H
CASCADE 61cm x 33cm x 37cm
DUAL FEED Model 64cm x 33cm x 37cm
Carton Size 75cm x 45cm x 53cm
Packed weight: CASCADE 17kg CASCADE DUAL FEED 18kg